Li-ion & DC Motor Programming Instructions
Shared Li-ion and DC motor instructions for pairing, operating limits, and supported programming functions.
HomeMotor resources
Motor resourcesAutomate motors.
Guides for the trade.
Download product and programming guides, review motor-family references, and watch official instructional videos for compatible Uprise shade and drapery systems.
Match the guide to the motor.
Check the motor’s label and supplied control before changing settings. Confirm the product reference, power type, and installation configuration. Keep the applicable manual with the project’s handover documents.
Product and programming guides.
Roller shades · rechargeable & DC
Download PDF
5V Zero Li-ion Q1.1 Product Guide
Zero Li-ion Q1.1 motor technical reference. Confirm the exact motor supplied.
Roman shades · CL motors
CL Motor Programming Instructions
DC Cord Lift CL0.6/CL0.8 programming guide for compatible drive systems.
CL 0.6 Motor Product Guide
CL0.6 low-voltage cord-lift motor product specifications.
Drapery · Versa & C1.2
Versa Drapery Motor Product Guide — US
Versa drapery motor and power-module reference.
Versa Drapery Motor Programming Instructions
Versa drapery motor setup and programming instructions.
C1.2 Drapery Motor Programming Instructions
ARC Drapery Motor programming manual supplied for the C1.2 support reference.
Outdoor shades · FT motors
FT Motor Programming Instructions
Fabric-tension line-voltage motor programming manual. Use the relevant US installation section.
Li-ion FT Motor Product Guide
Rechargeable Li-ion FT exterior motor technical reference.
Li-ion FT Motor Programming Manual
Dedicated rechargeable Li-ion FT motor programming instructions.
Official Automate supplier documents. Use the guide for the supplied motor model and configuration.
Motor-family reference.
Roller shades
Use the applicable rechargeable Li-ion or DC motor instructions. Confirm the power supply, tube hardware, and operating limits for the actual shade.
Roman shades
Review the CL motor reference and low-voltage wiring requirements. The guide describes a drive system; confirm the complete Uprise Roman configuration.
Drapery
Versa and C1.2 are different motor families. Match power, track arrangement, and limit-setting instructions to the supplied equipment.
Outdoor shades
FT line-voltage and Li-ion FT battery motors need the correct guide. Review the lock and tension configuration with the installer before programming.
Integration planning
Motor programming and bridge integration are separate setup tasks. Establish the shade’s operating limits, then pair and test the approved integration.
Bond Bridge Pro resourcesMotor and remote programming videos.
Official Automate instructions for common setup tasks. Apply the steps only to the motor and controller shown or identified in the applicable guide.
Automate | ARC Programming in five simple steps
A complete ARC motor setup walkthrough, from pairing through setting travel limits.
Automate | Waking and Pairing | Instructional Video
Wake an ARC motor and pair it with a compatible remote before programming.
Automate | Setting shade limits | Instructional Video
Set the upper and lower stopping positions during initial ARC shade setup.
Automate | Adjusting Limits | Instructional Video
Change previously programmed upper and lower travel limits.
Automate | Push PRO | Using the Leveling Function to Align Shades
Use the Push PRO leveling function to align multiple shades.
Automate | Battery Check Functionality
Check an Automate motor’s battery status using the remote battery-check function.
Programming questions.
Which programming guide should I use?
Match the motor reference and control system to the guide before programming. Some manuals apply across multiple motor families; others are specific to a product.
Can I watch motor-programming videos on this page?
Yes. The embedded official videos cover pairing, limits, adjustments, and selected controller functions. Check the video’s applicability to the supplied motor and remote.
Where do I find Bond integration guidance?
Visit the Uprise Bond Bridge Pro resource page for setup guidance, downloadable technical references, and integration videos.
What if the listed motor does not match my order?
Send Uprise the order reference and motor label. Our team can help identify the relevant installation and programming information.
Need the right guide for an order?
Send the motor label, product family, and order reference to Uprise.